Xspot, how technology is found.

The Xspot Strap is a universal mounting option for speakers, lighting, security, control and more. Use the Strap to span wide areas, fit into corners or line up with other technology.

The new Smooth mounts an Alpha into exterior siding that requires a smooth finish perfect for Cameras that require a small hole. Finish the hole with the Xspot Grommet for a professional fit and finish.

Edge bracket is perfect for mounting cameras into stucco on exterior walls. Works with the Alpha endpoint.

The Steel bracket mounts the Alpha endpoint device into steel studs.

Cover Plate Single mounts the Groove endpoint device onto a single gang metal box.

Cover Plate 4Square Double mounts the Groove endpoint device onto a 4 square or double gang metal box.

Cover Plate Octagonal mounts the Groove endpoint device onto a octagonal metal box.

The Ring is used to mount the Alpha endpoint device for any technology that Trims out to a single gang box. The Ring can also provide a buried conduit location allowing you to pull the wires later.

Xspot Screws avoid splitting the Strap using Truss head #8 with self-tapping heads. Works with metal or wood studs. Box of 100.

The KNX Cover Plate Round provides a simple, professional finish for KNX/Euro-style wiring and device locations. Its compact round design covers the opening without the oversized appearance of a traditional wall plate, helping maintain a clean architectural finish while keeping the location protected and accessible for future installation or service.

Ideal for projects where wiring locations need to remain concealed until equipment is installed, the CPR-1 gives contractors a consistent way to finish unused, temporary, or future-ready KNX/Euro locations while preserving easy access when needed.

The XSquare is purpose-built for prewiring square European-style wall jacks and Lutron square keypads, giving every installation a clean, professional edge. Flexible mounting options allow you to secure it through the four outside flanges or, for a slimmer profile, use the recessed screw holes at each corner. Alignment is simple and precise—cover plate screw holes make it easy to level with nearby high-voltage jacks. With the XSquare, you can step up your craftsmanship and deliver installations that meet the highest standard of detail and design.

The Low Voltage Back Box with Conduit Mount creates a protected transition between conduit and the final equipment location while keeping wiring and connections inside the building structure. Designed for both rigid and flexible conduit, it eliminates the need for a large exposed junction box at many equipment locations and helps create a cleaner finished installation. Compatible modular backboxes can be added when additional wire storage or protection from insulation and construction materials is required. 

The Conduit Mounting Bracket provides a simple, purpose-built way to position flexible or rigid conduit at a precise wiring location. Conduit can be secured in place or left removable depending on the application, allowing wire, terminated cables or pull material to remain protected inside the pathway throughout construction. At trim, the conduit can remain in place or be removed as needed, giving the installer greater flexibility while maintaining control of the wiring location. 

The Slim Ring brings a professional low-voltage mounting and trim solution to spaces with less than 1" of cavity depth. Designed for shallow wall systems, concrete and block construction, furring strips, hat channel and other space-restricted installations, it creates a precise wiring location without requiring the depth of a conventional electrical box. Pair it with a compatible backbox when additional wire protection or connector storage is needed, or use it as a compact open-back mounting location. At trim, excess wire and connections can be concealed behind the finished surface for a cleaner installation.

XSlide adds adjustability to compatible Xspot mounting rings, giving installers the ability to fine-tune a device location after the initial mounting position has been established. The mounting ring rides along XStrap and can remain movable or be locked into a precise position when the final alignment is determined. This makes it easier to coordinate keypads, controls and other devices with neighboring electrical boxes, cabinetry, architectural details and client preferences—without rebuilding framing or relocating the entire mounting assembly.

The Smooth bracket with Fins was designed to mount and lock into sheetrock.