Xspot Products
Wire Location System
Wire Location System
Xspot Products
"X"Marks the spot
"X"Marks the spot | Model | Description |
Product Image |
| Xspot | Reusable wire location Tool, allows contractor to place wires in exact location to later locate to 1/4" through an inch of wood. Xspot allows for larger gauge wires, multiple wires and can be removed through a 2" hole. |
 |
| Xspot-Mini | Reusable wire location Tool, allows contractor to place wires in exact location to later locate to 1/4" through an inch of wood. Xspot-mini allows for small gauge wire and can be removed through a 1" hole. |
 |
| Xstrap | Mounting solution for Xspot and Xspot-mini. Marks every 6 inches and holes 1/2" apart, Xstrap acts like a tape measure to help place your prewire locations exactly where you want them. Attach a section of Xstrap between two studs or joists where you want to create your prewire location and snap in either an Xspot or Xspot-mini with the wire(s) attached. |
 |
| Xbox | Xbox is the first patented low voltage wallbox developed to be buried behind the wall. Perfect for future data jacks, volume controls or anything else that uses a standard sized box. Using the Xspot wire location system and 3/4" conduit you can also create a "prewire" location without the expense of running the wire. If you know that the location will need certain wires of course put them in at prewire, but for those locations like future Flat screen TVs or projectors who knows what the future holds. |
 |
| Xspot Locator Tool Set |
The Xspot Locator tool set includes: 1- Xtreme Locator used to find an Xspot or Xspot-mini, accurate to 1" and able to confirm that you have found an Xspot device not a nail, screw or some piece of metal. By using the reverse polarity of magnets one side of the Xtreme tool will be attracted and the other side will push away when it is up against another magnet. 1-The Xcentric tool is used once you have confirmed you are on the right location. The Xcentric will center on the Xspot or Xspot-mini behind the wall accurate to 1/4". Once located then make a mark in each of the four holes, take the Xcentric off the wall, connect the four marks with two lines creating the signature "X" , drill in the center of the X (like the crosshairs of a rifle scope) mark whatever size opening you need for that location, drill the appropriate sized hole. |
|
| Xbooty bag | No, not that kind of booty, think of the booties you put over your
shoes when someone is working on a house to protect new flooring or
carpeting. The Xbooty bag protects the wall in the same way, in case
the Extreme locator tool has sharp edges or something on it that could damage the wall. The booty bags can be washed and are reusable. No one wants to pay to repair an expensive paint or finish on a wall. |
 |
| Xpack AV |
Xpack AV includes:
|
 |
| Xpack Security |
Xpack Security includes:
|
 |
Copyright . Xspot Products a division of Prime Industrial Design LLC. All rights reserved.
